When it comes to dressing your windows, there are many options available. Out of all the alternatives, zebra blinds are undoubtedly one of the most versatile and stylish choices. Not only do they provide a sleek and modern look, but they also offer excellent light and privacy control. However, to ensure that you get the maximum benefits from your zebra blinds, precise measurement and installation are vital. In this comprehensive guide, we will walk you through the steps to measure and install zebra blinds smoothly and accurately.
Measuring
Measuring your windows from which zebra blinds hang requires precision. By following the steps below, you will achieve the perfect measurements for your zebra blinds.
Step 1 - Gather your Measuring tools
Before starting the measuring process, make sure you have the necessary tools to execute the task. You will need a measuring tape, a pen, and a paper to record the measurements.
Step 2 - Measure the Width and Height
The first measurement you need to take is the width. Measure the distance from left to right on the inside of the window frame; take three measurements at the top, middle, and bottom of the window frame. The smallest of these measurements is what you should use. You will use these measurements to get your PerfectFit zebra blinds.
Next, you need to get the height measurement by following the same process. However, measure the distance from the top to the bottom of the window frame.
Installation
After obtaining the right measurements for your zebra blinds, the next step is installation. Before you start, ensure that you have all the required tools such as a drill, screws, brackets, and a pencil.
Step 1 - Mounting the Brackets
Mount the brackets at the middle and the ends of the top of the window frame where you will attach your zebra blinds. Remember to ensure the brackets are level before drilling them.
Step 2 - Slotting in the Zebra Blinds
Proceed to slide the headrail of the zebra blinds into the brackets that you mounted. After that, snap the headrail into place on the brackets.
Step 3 - Attach the Bottom Rail
After you have slotted in the zebra blinds, you should now mount the bottom rail. Turn the bottom rail around in the correct position facing right. After that, clip the bottom rail onto the zebra blind fabric and screw the end caps into the bottom rail.
Step 4 - Finishing
The last step involves testing, ensuring that the zebra blinds are operating smoothly and as they should be, and congratulations now you have successfully installed zebra blinds.
In conclusion, Zebra Blinds are a perfect blend of light filtering and privacy. To get the maximum benefits from these blinds, precise measurement and installation are essential. By following these comprehensive steps, you are sure of achieving the right measurements and installing your zebra blinds correctly.
Français
